LED Bulkhead Lights – IP54 Round, Oval & Sensor Models

Compare Six IP54 LED Bulkhead Models

All six models are IP54 and surface-mounted. Start with the mounting location, available space and supply voltage, then compare the diffuser, colour temperature and control method. Shape alone does not identify the electrical specification: the 18W PIR model uses AC170–265V, the white-diffuser model uses AC165–265V, and the other models listed here use AC110–265V. Confirm the exact version on the quotation and approved sample.

Dimensions above describe only the versions specified. The white-diffuser row gives an oval size; it does not establish a round diameter. A dash means the comparison does not specify that value. Request the drawing for the shape you intend to order and check mounting clearance before choosing a fixture.

IP44 vs IP54 vs IP65: Which Bulkhead Light Do You Need?

• IP44: protected against solid objects over 1 mm and splashing water. Typical use: indoor damp areas, subject to the installation requirements.
• IP54: dust-protected and protected against splashing water from any direction. Typical use: corridors, stairwells, utility rooms, bathrooms outside direct spray and outdoor areas under cover, such as porches, canopies and balconies.
• IP65: dust-tight and protected against water jets. Consider this level for exposed locations or wash-down areas, with the complete installation specification checked separately.

All six LUXBONTOP bulkhead models on this page are IP54. They are not water-jet or immersion fixtures. For walls exposed to driving rain, hose-down cleaning or car-wash conditions, select an appropriately rated IP65 fixture instead of assuming an IP54 bulkhead is suitable. For bathrooms, ask a qualified electrician to check the required IP rating for the installation zone under local wiring regulations.

Where Are LED Bulkhead Lights Used?

• Corridors and stairwells: compare surface-mount dimensions and consider the PIR version where intermittent lighting is useful.
• Building entrances and covered porches: keep the fitting under cover and outside direct water jets.
• Balconies and canopies: assess exposure to weather before specifying IP54.
• Bathrooms and utility rooms: check the installation zone, splash exposure and local electrical requirements.
• Car parks and plant rooms: confirm cleaning methods, dust conditions and the actual mounting location.
• Apartments, hotels and schools: compare shape, finish and colour temperature for a consistent project specification.

Review our lighting applications alongside the product drawings. An application example helps frame the brief; it does not replace a lighting design, installation assessment or confirmation that a particular model meets a project's requirements.

Bulkhead Light with Motion Sensor

Our 18W IP54 bulkhead light has a built-in PIR motion sensor that switches the light on when someone enters the area. It is commonly used in corridors, stairwells and entrances where lighting does not need to remain on continuously. Round Ø170 × 55 mm and oval 210 × 117 × 55 mm versions are available with black or white housings. Input is AC170–265V, with 3000K, 4000K or 6500K options.

See the 18W PIR bulkhead light and confirm its control behaviour for your installation before ordering. Do not assume that the non-sensor models include motion detection.

OEM/ODM Bulkhead Lights for Wholesalers

For wholesale and OEM/ODM inquiries, send the selected model, destination country, quantity, input voltage, CCT, branding and packaging requirements. Confirm the specification sheet, installation drawing, required certificates and sample approval before agreeing production details. Certification requirements must be checked for the exact model and market; no unverified certification is implied here.

Sample development typically takes about one week after specifications are confirmed. Mass production typically takes 25–30 days after sample approval, depending on the model, quantity and customisation. These are planning figures: request an order-specific schedule before making delivery commitments.

Use our LED bulkhead light OEM/ODM quote checklist to prepare a comparable RFQ and review drawings, samples and order terms. If you need more than one shape or input version, list each separately so the quotation identifies the correct product rather than treating all bulkhead lights as interchangeable.

Request a Bulkhead Light Quote